This download directory includes the following:

archive:	directory with older versions of the tools

decho:		REMOVED and REPLACED with dplus

dplay:		play dvtool file to remote gateway/repeater

dplus-2.1:	gateway addon daemon that provides:
			echotest:   use "XXNYYY E" where XXNYYY is repeater call
			voice mail: use "XXNYYYS0" to store a voice mail
				    use "XXNYYYR0" to recall voice mail
				    use "XXNYYYC0" to clear voice mail
				    only voice mail register 0 available now
			simulcast:  use "XXNYYY  " to simulcast to all modules
			ID:         use "XXNYYY I" to recall repeater ID
			            requires /dstar/tmp/id.dvtool recorded file
			            run echo test and copy echo.dvtool to
			            id.dvtool. If linked, plays the linked msg.
			link/unlink: use "XXNYYYML" to link current module
                                    to gateway XXNYYY module M.  Use "REFNNNML"
                                    to link reflector NNN module M.
                                    Use "       U" to unlink.
                                    There are currently nine reflectors,
                                    001, 002, 003, 004, 005, 006, 007, 008, 009.
                                    Note that you should not link more than
				    one local module to the same reflector/
				    module.
				    REF001: US / Chicago / high bandwidth
				    REF002: US / Nebraska
				    REF003: AU / limited bandwidth to US
				    REF004: US /
				    REF005: UK / London / high bandwidth
				    REF006: UK / used for DE / high bandwidth
				    REF007: IT /
				    REF008: IT /
				    REF009: US / Arizona
			echotest recording to file: saves echo test in file
				    /dstar/tmp/echo.dvtool
			playback from saved file: copy dvtool file to
				    /dstar/tmp/play-a.dvtool to play on module a
				    /dstar/tmp/play-b.dvtool to play on module b
				    /dstar/tmp/play-c.dvtool to play on module c
			connection from external tools: allows users with a
				    DV Dongle and DVTool to connect to the
				    gateway for listening (and transmitting).
			            You must now use the dplus.conf config
			            file in the /dstar/tools directory.  This
			            config file allows admins to control how
			            many connections and who can connect for
			            both transmit and receive.
				    This also provides the infrastructure for
				    gateway/repeater linking.
                        linking from command line:
			            use "XXNYYYML" to link current module, e.g.
              		            echo "REF001CL" >/dstar/tmp/link-b
			               to link your local module B to reflector
                                       module C
			            echo "       U" >/dstar/tmp/link-b
			               to unlink your local module B from any
                                       gateway/reflector
			Please make sure you forward UDP ports 20001 to 20005
			            into your gateway system just like you
			            forward UDP port 40000.
                        Note that all of the callsigns above are in URCALL and
                                    rpt1 is local module and rpt2 is gateway.

dshark:		dstar protocol sniffer

dswatch:	what files in /var/dsipsvd directory as they come in

DVTool-dist.zip: utility for DV Dongle users that provides for testing the
                 dongle, connect to other dongle users for a full duplex
		 conversation, and connect to gateways for rx/tx
                 See http://www.dvdongle.com for more information.


Updated 2008/07/16 AA4RC - Robin Cutshaw